I tried to use two programs, but still failed until I found this forum. You have to choose a username for the site that only lasts a few moments. Then you can post your question and our members will help you. We also had the problem of the absence of EULA (“Setup can`t find the end user license agreement”). I used Rufus 1.3.4. In advanced format options, you can change the BIOS IDENTIFIANT. The BIOS STANDARD ID was set by Rufus at 0x81. I tried to 0x82 that made the PC restart forever. Then I tried to 0x80 and went past the LABO message and was able to format the partition and the installation files were copied onto the score. Unfortunately, after a reboot, I launched the error message “Windows couldn`t start because the next file is missing or corrupted: -System32-hal.dll Thanks for reinstalling a copy of the file above.” I could solve this problem by repairing the start file.ini on the target PC hard drive and doubly replacing “multi(0)disk (0)rdisk (1) partition (1)” with “multi (0)disk (0) rdisk (0) partition (1)”.

4) If Windows has copied the installation files and installation will start earlier, there used to be hpt3xxx.sys file missing error I extracted the file from i386 driver.cab to an i386 folder and bypassed hpt3xx.sys error just for registration and without any offense to any other method/tool and their respective authors, I would like to try the winsetupFromUSBwithGUI approach, which is the approach – I believe – the most tested . The most common problem is that your source-XP does not contain the right hard drive players for your system. If your BIOS is set up for SATA AHCI mode, change it to Legacy IDE mode. If you can`t change AHCI/SATA`s BIOS mode, you must either get an XP installation CD/ISO with built-in mass storage sensors, or use Easy2Boot with the Mass Storage Driver Pack. Turn off the AHCI startup (but I can`t find an IDE start option to activate it). I know it will work well despite the reader`s registration, but my end user is not a computer scientist and he is kind of confusing them after the last 20 years with C: reader. We also had the problem of the absence of EULA (“Setup can`t find the end user license agreement”). I set the hard drive to launch it before the USB stick, and I used F12 to get a priming menu. Nevertheless, the Windows files were copied to the USB drive. Before he started copying, he said: “Review 80GB disk” or something on this scale, which is the hard drive.

Setup knows that the disc is available. The first score is FAT32 8GB, active set. The second partition is NTFS 65GB, logically expanded. As mentioned above, it works well when I install Windows from an optical drive (same partition scheme: Windows installs on 8GB FAT32). also a look here superuser.com/a/623998/63915 Pretty much that, I`m trying to reinstall XP on an old legacy type system that is an Acer SA60. I know the USB installer works because I have completely installed Windows XP on another system. I tried to install xp on a netbook with linux with rufus. It seems that Flashdisk is a bootable player now and is trying to install xp on the netbook, but there is an error saying “Setup can find the end user Licencing Agreement” (EULA) and then end the setup. . Everything works well for me, except that my Windows player is now “D:”. instead of “C:”. An example of an unattended.txt file is included in E2B for the Asus EeePC 904.